LS Rolamentos simples

Contate agora

LS Single Shielded Bearings. Bearings extend the working life of wheels, pulleys, and other rotating parts by reducing friction and enabling parts to move smoothly. Also called slewing rings or slewing bearings, they are installed between two surfaces to keep parts aligned and support axial and radial loads.Single Shielded, Single Sealed Ball Bearings. Ball bearings, or deep-groove bearings, extend the working life of equipment by enabling wheels, pulleys, and other rotating parts to reduce friction and move smoothly. Ball bearings have a series of round balls encased in a housing and support high axial or low-to-moderate radial loads.

 

Single row deep groove ball bearings are the most widely used bearing type . They are available capped (with seals or shields) or open. They are available capped (with seals or shields) or open. Open bearings that are also available capped may have recesses in the ring side faces. Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.

 

70 mm x 110 mm x 58 mm LS GEF70ES Rolamentos simples

774 56
40 mm 40 mm

82,55 mm x 130,175 mm x 123,825 mm LS GEWZ82ES Rolamentos simples

200 80 mm
82,55 mm x 130,175 mm x 123,825 mm 80

69,85 mm x 111,125 mm x 104,775 mm LS GEWZ69ES Rolamentos simples

33215JR B04334
31171516 2

40 mm x 62 mm x 40 mm LS GEEW40ES-2RS Rolamentos simples

6,3 mm 3,86 mm
52 34,11

LS SIA70ES Rolamentos simples

0.11 kN 0.15 mm
11.5 mm 3.9 mm

LS SAJ16 Rolamentos simples

17 2400 r/min
NSK 16.5

LS SIA40ES Rolamentos simples

Timken 1,5 mm
64,987 mm 136,525 mm

88,9 mm x 139,7 mm x 77,775 mm LS GEZ88ET-2RS Rolamentos simples

23 mm 88,9 mm x 139,7 mm x 77,775 mm
23 mm 72

LS SIR70ES-D Rolamentos simples

INA 0,076 Kg
31.75x41.275x28.58 36,5 kN

LS SIZJ6 Rolamentos simples

WS81222 8.97 Hz
259 kN NTN

80 mm x 125 mm x 29 mm LS GAC80N Rolamentos simples

6,35 0,6 mm
63,5 76,2
1/21