NTN Rolamentos de esferas de contacto angular

Contate agora

NTN Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.    Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

 

Angular contact bearings can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.Angular Contact. SINGLE ROW ANGULAR CONTACT Single row angular contact ball bearings feature raceways with high and low shoulders. These opposing raceways are designed to carry thrust load in one direction. NTN can preload the bearings at the factory so that the correct load will develop once the bearing is put into service.

 

70 mm x 100 mm x 16 mm NTN 2LA-BNS914LLBG/GNP42 Rolamentos de esferas de contacto angular

140 mm Ball Angular Contact
45 Degree 4800 rpm

110,000 mm x 169,500 mm x 56,000 mm NTN DE2208 Rolamentos de esferas de contacto angular

83.2 KOYO
18 mm 110,000 mm x 169,500 mm x 56,000 mm

90,000 mm x 160,000 mm x 30,000 mm NTN QJ218CS134 Rolamentos de esferas de contacto angular

4,9 kN 14
20 mm 10

65 mm x 100 mm x 18 mm NTN 7013DT Rolamentos de esferas de contacto angular

1370 mm 1640 mm
1250 65 mm x 100 mm x 18 mm

25 mm x 47 mm x 24 mm NTN 7005UCDF/GMP4 Rolamentos de esferas de contacto angular

31594/20 34,925 mm
PFI 76,2

75 mm x 95 mm x 10 mm NTN 7815G/GMP4 Rolamentos de esferas de contacto angular

2.441 Inch | 62 Mill 25
1.1 mm ABEC 1 | ISO P0

25 mm x 62 mm x 17 mm NTN 7305BDB Rolamentos de esferas de contacto angular

25 mm x 62 mm x 17 mm 30
30 mm 19,5 mm
1/21